Improving of milling condition of free-form surfaces
Keywords:
simító marás, gömbvégű maró, felületi érdesség, fordulatszám szabályozásAbstract
When finishing free-form surfaces with ball-end milling cutters, the cutting circumstances are constantly changing as the surface changes. This affects the load on the tool, the roughness and the accuracy of the finished surface. The paper describes the variations due to changing milling conditions, as well as the method of continuous speed control and the results that can be achieved.
References
Zebala W., Plaza M. (2014) Comparative study of 3- and 5-axis CNC centers for free-form machining of difficult-to-cut material. Int. J. Production Economics. 158:345-358; https://doi.org/10.1016/j.ijpe.2014.08.006
Sadílek M., Poruba Z., Cepová L., Šajgalík M. (2021) Increasing the Accuracy of Free-Form Surface Multiaxis Milling. Materials. 14(1):25; https://doi.org/10.3390/ma14010025
Mali R.A., Gupta T.K.V., Ramkumar J. (2021) A comprehensive review of free-form surface milling – Advances over a decade. J. Manufacturing Processes. 62:132-167; https://doi.org/10.1016/j.jmapro.2020.12.014
Sun Y. et.al (2021) Path, feedrate and trajectory planning for free-from 5 surface machining: A state-of-the-art review. Chinese J. Aeronautics. 35(8):12-29; https://doi.org/10.1016/j.cja.2021.06.011
Grešová Z., Ižol P., Maňková I. Vrabeľ M. (2021) The effect of cutter path strategies on surface roughness when machining titanium alloy. J. Production Engineering. 24(2):9-12; http://doi.org/10.24867/JPE-2021-02-009
Mikó B., Zentay P. (2019) A geometric approach of working tool diameter in 3-axis ball-end milling. Int. J. Advanced Manufacturing Technology; 104(1-4):1497–1507 https://goi.org/10.1007/s00170-019-03968-9
Varga B.; Mikó B. (2023) Investigation of the cutting force and surface profile error when free form milling. Acta Technica Jaurinensis, 16(1):27-33 https://doi.org/10.14513/actatechjaur.00685
Varga B.; Mikó B. (2022) CAD modelling of the chip shape in case of ball-end milling. Mérnöki és Informatikai Megoldások/Engineering and IT Solutions 3(2):30-38 https://10.37775/EIS.2022.2.3
Mgherony A.; Mikó B. (2023) Controlling the spindle speed when milling free-form surfaces using ball-end milling cutter. Acta Polytechnica Hungarica 20(6):135-149 https://doi.org/10.12700/APH.20.6.2023.6.8
Mgherony A.; Mikó B. (2023) The effect of the spindle speed control when milling free-form surfaces. The International Journal of Advanced Manufacturing Technology; 130(3-4):1439-1449 https://doi.org/10.1007/s00170-023-12811-1
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Bánki Közlemények (Bánki Reports)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Bánki Közlemények is loyal to open access for academic work. All the original articles and review papers published in this journal are free to access immediately from the date of publication. We don’t charge any fees for any reader to download articles and reviews for their own scholarly use.
The Bánki Közlemények also operates under the Creative Commons Licence CC-BY-NC-ND. This allows for the reproduction of articles, free of charge, for non-commercial use only and with the appropriate citation information. All authors publishing with the Bánki Közlemények accept these as the terms of publication.
