The flow calibration procedure of syringe pumps with infusion device analysers

Péter Zombory

Authors

Péter Zombory National Korányi Institute of Pulmonology, Budapest, Hungary

Keywords:

calibration, syringe pump, medical device, uncertainty, infusion device analyzer, IDA

Abstract

Everyday practice in Hungary shows that it is not typical for various examinations and measurements of medical devices used in the healthcare sector to be accompanied by a value of measurement uncertainty. In this study, A specific example is used to illustrate which uncertainty factors can be taken into account and how the expanded measurement uncertainty of the measured value can be determined in case of measuring the volume flow rate of a syringe pump infusion dosing device.

References

VIM3 Nemzetközi Metrológiai Értelmező Szótár – Alapvető fogalmak, kapcsolódó szakkifejezések (2018)

MSZ EN ISO 7886-2:2000 Steril, egyszer használatos injekciós fecskendők. 2. rész: Energiával működtetett fecskendőpumpával használható fecskendők

Syringe Drivers: incorrect selection of syringe type from the syringe menu may result in significant errors in drug delivery - Anaesth Intensive Care 2014; 42: 467–472

Metrology in Health: Good Practices Guide, Part II, Chapter III, 20. old.

https://www.bbraun.com/en/products/b/original-perfusorsyringe50ml.html

https://www.sigmaaldrich.com/labware/labware-products.html?TablePage=17216053

Molgroup, Polipropilén Termék Katalógus: https://mol.hu/images/mol_hu/pdf/vallalati_ugyfelek/polimer-termekek/termekek/pp-polipropilenek/termekkatalogus_pp_2018.pdf

https://academy.esicm.org/course/view.php?id=210

HLT07 MeDD: Metrology for drug delivery (https://drugmetrology.com/ )

Fluke Biomedical, IDA-4 Plus Infusion Pump Analyser, Operators Manual